7100 4T 10W-40 High performance lubricant for bikes 100% Synthetic – Ester

Lubrificante 100% sintetico con tecnologia estere. Grado di viscosità standard, raccomandato da quasi tutti i costruttori di moto a livello mondiale. Realizzato con additivi anti-usura e resistenza al taglio per offrire una perfetta protezione degli ingranaggi e una lunga durata.

TYPE OF USE
High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...
Other uses : street bikes without catalytic converters, scooters, ATV, mopeds...

PERFORMANCE
STANDARDS API SL / SJ / SH / SG
APPROVAL JASO MA under N° M033MOT052
Protection
Ester Technology :
- Low traction coefficient Ester to minimise engine internal friction losses and improve performance
- Synergy of Ester with anti-wear additives and improved shear resistance for improved gear protection and life time.
100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs. Low Phosphorus and Sulphur content for better operating conditions of catalytic converters required for last emission regulation.
JASO MA approved to warranty a perfect lock up of wet clutch at take off, acceleration and full speed.
Easy gear shifting.

RECOMMENDATIONS
Drain interval : according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.

PROPERTIES
Colour Visual Red
Viscosity grade SAE J 300 10W-40
Density at 20°C (68°F) ASTM D1298 0.861
Viscosity at 40°C (104°F) ASTM D445 90.25 mm²/s
Viscosity at 100°C (212°F) ASTM D445 13.48 mm²/s
Viscosity index ASTM D2270 151
Pour point ASTM D97 -36°C / - 32°F
Flash point ASTM D92 228°C / 442°F
TBN ASTM D 2896 8.2 mg KOH/g